Before everything, Kudos to you. It is a real achievement that you got your hands on a PlayStation 5 in this era or scalpers.
Now that you have a PS5, you want to play games online. Right? But you can’t. Because of the NAT Type failed error.
I have been there and am someone who is always wrapped around consoles, so I can assure you how annoying that can be. But don’t worry, I have the solutions for this exact fix.
Let’s dive in.
How to Fix NAT Type Failed on PS5
To resolve the NAT type failed error on PS5, you have to connect through wired or port forwarding on the router. In addition, enabling UPnP and DMZ often fix NAT Type problems. As a last resort, contact your ISP to solve the failing NAT type error on PS5.
Before going into troubleshooting, you need to know what NAT Type you are on and how to check it.
Follow the steps to Check NAT Type on PS5:
- Go to Settings from your PS5 menu.
- Select the Network.
- Click on Test Internet Connection.
After 10 seconds, you will get all the information about your internet connection on PS5, including the NAT type. 
If your NAT Type shows failed, there are plenty of ways you can fix this problem. But I handpicked the most useful and the easy ones. So please don’t skip any part, as I will explain the process step by step.
Here are the steps to fix PlayStation 5 NAT Type Failed issue:
1. Use Ethernet Cable
This is the easiest fix. With Ethernet Cable, you even download at the maximum possible speed with zero packet loss while playing online with your friends. If your PS5 keeps disconnecting from the internet, using this method will also solve this.
To use the LAN cable to fix PS5 NAT type error,
- Disconnect your WiFi from your PS5, then turn off the PS5.
- Then connect your Router to your PS5 via the Ethernet cable.
There you go, you are done. Now you can test your internet connection to see if your NAT is open or not. If your PS5 game doesn’t start at launch for connectivity, you can also eliminate the issue by this.
But I get it if you don’t want to strangle Cable. Personally, I don’t want that as well. This is why the following method can be suitable for you.
2. Setup Port Forwarding on Your Router
To open your NAT type, you must port forward on your Router. So, I will give you an essential guide on how to do that as it varies from Router to Router, but the main procedure is pretty much the same.
Before port forwarding, you need a static IP. So, let us get to make one.
Follow the steps below to set a static IP:
- Press Win+R to open Run, type cmd & hit OK.
- Type ipconfig /all in the console, and press enter.
- Note down the IPv4 Address, Subnet Mask, and the DNS Servers.
- Go to the Control Panel, and click on View network status and tasks.
- Click on Change adapter settings.
- Right-click on your network connection and hit Properties.
- Look for Internet Protocol Version 4 (TCP/IPv4), put a tick on it, and then click on Properties underneath it.
- Select Use the following IP address: then put a new address on the IP address field. It will be the same as the default gateway. Just change the last credential and keep it between 1 to 254.
- Write the Default gateway address you copied down earlier, as the Subnet mask will auto-fill.
- Click OK.
Now you have a static IP. Let’s head back to port forwarding. To do this,
- Login into your Router via browser.
- Go to the port forwarding section, usually in Advance settings.
- Put your IP Address.
- Put on TCP: 1935,3478-3480 and on UDP: 3074,3478-3479.
- Reboot the Router.
You are done port forwarding your Router. You can check if the port is forwarded or not by putting up your IP address and the TCP port on this website yougetsignal.
If you are facing difficulty port forwarding on your preferred Router, you can look for your Router on portforward website and there you will have the complete guide on how to do it on your Router.
You can now check your NAT type. Hopefully, it will be open for PS5.
3. Enable UPnP and DMZ on Your Router
Sometimes even though ports are open but because of UPnP and DMZ being disabled, you might get this error. It is effortless to enable them. So, let’s get into it.
Here is the way to enable UPnP & DMZ on Router:
- Log in to your Router.
- Go to your port forward section.
- Go to UPnP and enable it.
- Navigate to the DMZ section.
- Put in your PSN IP Address (If asked), then click on enable.
- Reboot your Router.
Then go to settings and test your internet connection on PS5. Besides this, you can also configure the fastest DNS server for PS5. Hopefully, your NAT is open now, and you can play all types of games. If your router doesn’t support UPnP, consider switching to a better router.
4. Contact Your ISP
Sadly, this is your last resort. If you tried everything and it is still not working on your PS5, you have to call your ISP and let them know your issue.
Because if there is something wrong from their end, then there is no way you can fix it from your Router. Ask them specifically if they have any restrictions on firewalls for PSN servers.
Hopefully, Your problem will be solved.
And if you are here for your PS4, proceedings are pretty much the same except for one fix. If you are on your PS4, then try disabling IPv6 from your Router. It might work for you.
How Many NAT Types are There for PS5?
There are three NAT Types: Open, Moderate, and Strict which are also known as NAT Type 1, NAT Type 2, and NAT Type 3, respectively. Each type portrays various security measurements. Depending on your need, you can verify your NAT Types & change it for your PS5.
NAT Type 1
This is the most unrestricted NAT Type on PlayStation Network.
It means all ports are open. There is no blocking or whatsoever. You can connect with anyone, except the NAT type 3.
But this NAT type being open might be risky for you because all ports are open, and there is no firewall restriction, which makes your system vulnerable when it comes to cybersecurity.
But for this connection, you need a LAN cable connected directly to your PS5 from your router.
NAT Type 2
This NAT Type is a sweet spot for gamers. You can connect with the people of NAT Type 1 and also NAT Type 3.
If you have a Public IP address but are not connected with your router via LAN Cable, you will most likely have this connection.
But there are still some restrictions in this NAT Type, but it will not affect your gameplay.
NAT Type 3
NAT Type 3 is the strictest NAT Type on PSN.
Most of the time, people with this NAT type encounter the problem of NAT type failure. On this NAT type, most of the ports are blocked, which is why you cannot connect with your friends.
People with local IP addresses end up having NAT Type 3. It restricts everything on the firewall.
On this NAT type, you will also not get your desired download speed. Even though you cannot connect with people with NAT Type 1, if you want to live in a safe cloud space, this NAT type is for you.
Now you know about the types, what NAT Type is best for PS5?
NAT type 2 is the best NAT type for gamers. Because in NAT type 2, you can connect with various gamers.
With NAT Type 2, you can connect to people with NAT Type 1 and those with NAT Type 3. But if you have NAT Type 1, you can not connect to NAT Type 3 and vice versa.
So regarding connectivity among the gamers, NAT Type 2 is best.
How to Check and Change NAT Type on PS5
Now you know about different NAT Types and which is best for gamers. So, can you change NAT Type on PS5? Yes, you can check and change your NAT type in PS5.
Here is the process to check NAT Type on PS5:
- Open the PS5 Dashboard and navigate to PS5 Settings at the top right corner of the screen.
- Press X to Select Network > Connection Status.
- Go to View Connection and Scroll Down to NAT Type.
From here, you will know about your NAT Type.
If you want to go NAT type 1, then you will need a LAN connection, and your router needs to be port forwarded.
Without using a LAN connection, you will be on NAT type 2.
However, if you want a secure connection or a NAT type 3, you have to port forward and block some ports.
Why Does NAT Type Fail on PS5?
The NAT Type failure on PS5 means something is wrong with your network connection. Either you have a restricted internet connection, or the ports are blocked, which requires connecting with the PSN network. With the NAT type failing, you cannot create a PlayStation party chat.
NAT type fails if you have a problem with your internet connection or a NAT Type 3. Sometimes NAT type fails because of your DNS server or your IP address. Also, if you have a restricted internet connection, it is more likely that you will face the problem.
Before going to your network provider, if you live in a country where most of the internet connection is restricted, there is a big chance you will encounter this problem.
On the other hand, if you live in a free country, then you might have to blame your ISP, aka internet service provider, as they might have blocked crucial ports for your NAT on PS5.
Moreover, sometimes you might need to change your DNS or enable DMZ/UPNP on your Router to open your NAT type.
FAQs
Why does my PS5 report that the NAT type has failed?
The main reason NAT Type failed on PS5 can be the router’s misconfiguration settings. Besides that, some ports can be blocked on the router. In addition, ports can also be blocked from Internet Service Providers.
Can you get NAT Type 1 on PS5?
You can get a NAT Type 1 on your PlayStation 5 by enabling UPnP or Port Forwarding. To quickly & easily do this, enabling UPnP is your best bet. But it opens the network to all incoming traffic which is risky & has a potential threat for Cyber Attack. Port Forwarding is a safer approach but can consume time.
Final Thoughts
It is very hectic for every console user when you cannot play with your friends, text, or voice chat in the party lobby because of some silly internet issue.
Hopefully, with this guideline, you can solve your problem. And if you have any more queries, you can always reach us.
